ACCESS USING TACACS+
8–6
8.3
Configuring TACACS+ with EnerVista Secure Web
Management software
To access the TACACS servers, select the Configuration > TACACS+
menu item.
By default, no TACACS servers are defined.
To add a server, click on the Add button as shown below.
Note that the TCP port field can be left blank – port 49 is used as a default port. Up to five
TACACS+ servers can be defined.
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CHAPTER 8: ACCESS USING TACACS+