GE Multilink ML3000 Instruction Manual page 115

CHAPTER 6: ACCESS CONSIDERATIONS
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
 Disable learning on required ports (for example, use the
port=11,15 disable
 (Optional step) Add any specific MAC addresses, if needed, to allow
designated devices to access the network (use the
mac=00:c1:00:7f:ec:00 port=11,15
 Disable access to the network for unauthorized devices (Use
port=11 <disable|drop>
be disabled or the packed dropped. Follow that with a
command to verify the setting).
security
 (Optional step) Set the notification to notify the management station
on security breach attempts (use the command
make a log entry or send a trap).
ACCESS CONSIDERATIONS
command).
add
command).
depending on whether the port should
signal port
learn
action
show port-
to
6–7