Updating Through The Enervista Software - GE Multilink ML3000 Instruction Manual

INTRODUCTION
1.7.4

Updating through the enervista Software

1–28
Once the upgrade is started, the terminal emulation firmware will ask for the installation
file location.
 Indicate the file location to begin the file transfer.
 Make sure the Xmodem protocol is also selected in this file location
dialog window.
In some operating systems it maybe necessary to select the transfer option.
In this case,
 Return to the HyperTerminal window used in step 5.
 Select the Transfer > Send File menu item.
 As shown below, enter the location of the new firmware file.
 Select the Xmodem protocol.
 Select the Send button and to begin the file transfer.
 Once the file transfer is completed reboot the switch with the
reboot
 Login to the switch and use the
and upload the configuration file (if necessary).
Use the following procedure to install the EnerVista Secure Web Management software.
 Download the latest MultiLink firmware from the GE Multilin web site.
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
command or by cycling power.
show version
CHAPTER 1: INTRODUCTION
command to verify