Privilege Levels; User Management - GE Multilink ML3000 Instruction Manual

INTRODUCTION
1.6.2

Privilege Levels

1.6.3

User Management

1–20
For the first time,
 Login with the name manager and password manager.
 Click on Login.
After a successful login, the welcome screen is shown. Note the different information
provided on the screen and different areas. The menus are used to configure settings on
the switch. Users can click on a specific port to open the port configuration view.
• Operator privilege users: operator privileges allow views of the current
configurations but do not allow changes to the configuration.
• Manager privilege users: manager privileges allow configuration changes. The
changes can be done at the manager prompt or for global configuration as well as
specific configuration.
A maximum of five users can be added per switch. Users can be added, deleted or
changed from a manager level account. There can be more than one manager account,
subject to the maximum number of users on the switch being restricted to five.
 Select the Administration > User Mgmt > User Accounts menu
item.
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
FIGURE 1–4: Welcome screen
CHAPTER 1: INTRODUCTION