GE Multilink ML3000 Instruction Manual page 131

CHAPTER 7: ACCESS USING RADIUS
MULTILINK ML3000 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
The command determines how the authenticator (MultiLink switch) performs the
reauth
re-authentication with the supplicant or PC.
reauth port=<num|list|range> [status=<enable|disable>]
[period=<10-86400>]
The port argument is mandatory and sets the ports to be configured. The status argument
is optional and enables/disables re-authentication. The period argument is optional and
represents the re-authentication period. This is the time in seconds the authenticator waits
before a re-authentication process will be performed again to the supplicant. The default
value is 3600 seconds (1 hour), and values range from 10 to 86400 seconds.
The command displays 802.1x related statistics.
show-stats
show-stats port=<num>
The command manually initiates a re-authentication of supplicant.
trigger-reauth
trigger-reauth port=<num|list|range>
ACCESS USING RADIUS
7–5