Requirements For Your Cube - 3D Systems Cube User Manual

5

REQUIREMENTS FOR YOUR CUBE

WEIGHT & DIMENSIONS
• Weight (without cartridge): 4 .3 kg (9 .5 lbs .)
SOFTWARE
• Complimentary software for Windows and Mac OSX .
This application converts your 3D model into layered
slices (G-code), ready for printing on your machine .
MINIMUM HARDWARE REQUIREMENTS
• A PC with these minimum requirements will be
required to run the Cubify Software
• Processor: Multi-core processor - 2 GHz or faster
per core
• System RAM: 2 GB
• Screen Resolution: 1024x768
WINDOWS REQUIREMENTS
• Cubify Software runs on 32 and 64-bit Operating
Systems
• Windows XP Professional or Home Edition with
Service Pack 3
• Windows 7
• Windows is required for ad-hoc WiFi Print Job
submission . NOTE: Ad-Hoc WI-FI connection will
not connect to Windows XP operating systems
• If not already installed, the Cubify Software installer
will automatically install the Microsoft .NET 4 .0
Framework
10" (25 .4 cm)
WIRELESS OPTIONS
•
NON-WIRELESS OPTION
•
MAC OSX REQUIREMENTS
•
ELECTRICAL REQUIREMENTS
•
•
MATERIAL STORAGE
•
•
•
OPERATING ENVIRONMENT
•
•
•
11 .25" (28 .6 cm)
13
802 .11b/g with: WLAN Infrastructure or Ad hoc
Mode .
USB Memory Stick, to transfer print files (supplied
with the Cube)
Cubify Software runs on Mac OSX 10 .8
Outlet requirements: 100-240 Volts, at 50/60 Hz.
Cube electrical rating: 24V DC, 3 .75 amp .
All polymers degrade with time . The following
conditions ensure the material remains high quality:
Do not unpack until material is needed .
Store at room temperature: 16-29° C (60 - 85° F)
Room Temperature: 16-29° C (60 - 85° F)
Nozzle- 280°C (536°F)
Print Pad- 66-77° C (150-170°F)
WALL
8" (20 .3 cm) 8" (20 .3 cm)