Table of Contents
Advertisement
Manual Offload Cart
manual offload cart
The
is an optional accessory for all ProX 800 models . The
offload cart allows you to easily remove the print pad when it is loaded with a
large or heavy part and transport it to the finishing area where supports are
removed and the part is cleaned before it is cured .
All parts must be offloaded with the manual offload cart to ensure optimal
safety .
ProCure™ 750 UV Curing Chamber
ProCure 750 UV Chamber
The
essential final part curing to create a fully solidified part with stable
mechanical properties and safe part handling . After printing on the
SLA system, the part is washed and rinsed, then placed in this unit .
Subjecting the part(s) to UV light for a period of time will fully solidify
the part. After the part is removed from the unit, it is fully solidified and
can be handled safely without gloves .
2
CONTROLLER - PART PREPARATION SOFTWARE
Included with the system is the
provide part preparation and part printing functionality . Print3D Pro utilizes the ProX 800 controller computer, which is an
integrated part of the ProX 800 . The 3DManage software is installed on a separate computer provided by the customer .
MINIMUM COMPUTER REQUIREMENTS
The following are the minimum computer configuration requirements for the part preparation computer to run 3D Manage:
Processor
•
Pentium 4 2 .4 GHz
Video Card
•
OpenGL 1 .4
•
128MB of graphics memory
•
Native PCI express x 16 bus interface
•
1280 x 1024 Resolution
RAM
•
2 GB
3D Systems, Inc.
is an optional accessory which provides
3DManage™
(for part preparation) and
ProCure 750 UV Chamber
Print3D Pro
software . These integrated modules
2
Manual Offload Cart
Advertisement
Table of Contents
