Alarm
Configuring the no-movement, man-down and
escape alarm
■ Configuring the no-movement, man-down and escape alarm
You want to activate/deactivate the man-down, no-movement or escape alarm.
You can activate/deactivate the man-down, no-movement or escape alarm independently of
each other and set the
man-down and escape
Settings
Sensor alarm
Man-down alarm
No-movement alarm
Escape alarm
80
Detection duration
and
alarm", page 76).
Press the navigation key to the right or the
Scroll to
Settings
and press the
Scroll to
Sensor alarm
Activating/deactivating man-down alarm:
1. Scroll to
Man-down alarm
2. Scroll to
Enable
and press the
3. Scroll to
Detection duration
ation may occur until the pre-alarm is triggered.
➔
Alarm is activated/deactivated.
Activating/deactivating no-movement alarm:
1. Scroll to
No-movement alarm
2. Scroll to
Enable
and press the
3. Scroll to
Detection duration
ation may occur until the pre-alarm is triggered.
4. Scroll to
Sensitivity
5. Select the sensitivity level and press the
➔
Alarm is activated/deactivated.
Activating/deactivating escape alarm:
1. Scroll to
Escape alarm
2. Scroll to
Enable
and press the
3. Scroll to
Detection duration
ation may occur until the pre-alarm is triggered.
4. Scroll to
Sensitivity
5. Select the sensitivity level and press the
➔
Alarm is activated/deactivated.
Sensitivity
(see chapter
Menu
Select
softkey.
and press the
Select
softkey.
and press the
Select
Select
softkey.
and set the duration for how long an alarm situ-
and press the
Select
softkey.
and set the duration for how long an alarm situ-
and press the
Select
softkey.
Select
and press the
Select
Select
softkey.
and set the duration for how long an alarm situ-
and press the
Select
softkey.
Select
"Using the no-movement,
softkey.
softkey.
Select
softkey.
softkey.
softkey.
softkey.
Aastra 630d