Terminating A Connection - Sierra Wireless AirCard 710 User Manual

AirCard 710/750 Network Card User Guide
32
4.
The message should change to "Data Status: GPRS
Connecting" and then "Data Status: GPRS Connected".
Connect
The button should change to a
Once the message is "Data Status: GPRS Connected", you can
use any Internet application (such as Internet Explorer,
Netscape Navigator, or your e-mail application).
The number of bytes sent and received (Tx and Rx) is
Disconnect
displayed above the
perform your tasks.
The speed of your connection depends on your service
provider, as well as on network coverage and congestion in
your current location. For more information, see "Connection
Speed" on page 3.

Terminating a Connection

To terminate a packet mode connection:
1.
Disconnect
Click the
In some cases, the network might terminate your connection.
This might happen, for example, if:
•
Your service provider is performing maintenance on their
equipment.
•
Your account is in arrears (not paid).
•
Your connection has been idle for a long time (that is, not
transferring data).
•
You travelled from an area that has GPRS coverage into an
area that doesn't have GPRS coverage.
Disconnect
button, and increases as you
button.
button.
2130135