Configuring Your Account - Sierra Wireless AirCard 710 User Manual

AirCard 710/750 Network Card User Guide
Note: See also "Information You
Must Get From Your Service
Provider" on page 5
18
3.
Pivot the antenna hinge so that it is vertical, as shown in
the following photos.
Figure 3-5: Pivoting the Antenna at the Hinge
Once you have installed the software, the following should
occur whenever you insert the AirCard:
•
If sound effects are enabled, the PC beeps.
•
The PC Card icon appears in the status area, if it is not
already displayed for another card, (and unless the feature
has been disabled).
•
Watcher launches (unless the auto-launch feature has been
disabled). Auto-launch is described in Table 6-3 on page
44.
The AirCard is powered as soon as you insert it.

Configuring Your Account

After installing the software and hardware, you can now enter
your account information into Watcher. Once this is done, you
can use Watcher whenever you need to connect to the Internet
or use your e-mail program.
To enter your account information into Watcher:
1.
Run Watcher, by selecting
> AirCard 710 > AirCard 710 Watcher
If you have a valid SIM card and are in an area that has
GPRS coverage, a screen titled "Configure a profile now?"
Yes
is displayed. Click
If instead the main Watcher window displays, this means
that you don't have a valid SIM card or you are not in an
area that has GPRS coverage. Click
the Profiles tab of the Options window.
Start > Programs > Sierra Wireless
.
Tools Options
> to access
2130135