Adding User Profiles; Aircard 710/750 Wireless Network Card User Guide - Sierra Wireless AirCard 710 User Manual

AirCard 710/750 Network Card User Guide
20
QoS (Quality of Service) parameters can be set in the
Advanced Profile Configuration window. However, you
should not change specific settings in that window unless
instructed to do so by your service provider.
4.
In the User Profile window, click
5.
If you want to have a GPRS packet data session established
whenever you are using this profile and whenever you are
in GPRS coverage, then check
6.
Click the Close button in the top right corner of the
Options window.
On completion of this step, the AirCard is ready for use.

Adding User Profiles

Optionally, you can configure more than one account (profile)
to use with your AirCard network card—such as if you travel
frequently to another city and have established a GSM account
with a service provider there. You might do so to avoid
roaming charges when using your AirCard network card in
the other city.
For each account you use, you must get information from the
service provider and configure the profile in Watcher, as
described in the previous section. You will also need a separate
SIM card for each account.
The profiles are stored on your AirCard (not on the SIM card).
To avoid roaming charges, you will have to insert the appro-
priate SIM card in your AirCard and, in Watcher, select the
corresponding profile.
Up to three profiles are supported.
To add profiles:
1.
From the main Watcher window, click
2.
From the Profiles tab, click
For a description of what to type in each field, see "Config-
uring Your Account" on page 18
OK
.
Auto Connect
.
Tools Options
>
Add
.
2130135
.