Sierra Wireless AirCard 710 User Manual page 29

Rev D Jan.02
Chapter 3: Installation on Notebook PCs
2.
In the Profiles tab of the Options window, click
The User Profile window appears.
3.
Fill in the following fields:
Profile Name
—type in any name that will help you remem-
ber the purpose/use of this account. This name will be
shown in the main Watcher window and, if you later create
more profiles, you can use it to select this profile.
User Name Password
and
word that the service provider gave you. Note: some ser-
vice providers do not use these fields. In this case, leave
them blank.
APN (Access Point Name)
provider gave you, if any (some service providers do not
use this, and allow a blank name). This is the name of the
gateway through which you will be connecting to the
Internet.
If your service provider gave you a specific IP address for
your AirCard, then select the radio button "
Address
", and type the address in the
ally, you should select the radio button "
Address Automatically
".)
If your service provider gave you values for
Secondary DNS
and , then enter the values into the corre-
sponding fields. Otherwise, leave the fields set to zero.
If your service provider is using header compression and/
or data compression, then click
Advanced Profile Configuration window, select the check-
box(es) for the feature(s) that your service provider sup-
OK
ports. Then click .
Add
—type in the user name and pass-
— type in the name that the service
Specify An IP
IP Address
field. (Usu-
Obtain An IP
Primary DNS
Advanced
, and, in the
.
19