Snmp-Server Location - HP ProCurve 420 Management And Configuration Manual

snmp-server location

This command sets the system location string. Use the no form to remove the
location string.
Syntax
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
HP420(config)#snmp-server location WC-19
HP420(config)#
Related Commands
snmp-server contact (page 6-26)
Command Line Reference
SNMP Commands
6-29