Command Line Reference
802.1x Port Authentication
6-44
Command Mode
Global Configuration
Command Mode
•
The access point supports up to 1024 MAC addresses.
•
An entry in the address table may be allowed or denied access
depending on the global setting configured for the address filter default
command.
Example
HP420(config)#address filter entry 00-70-50-cc-99-1a allowed
HP420(config)#
Related Commands
address filter default (page 6-43)
show authentication (page 6-46)
address filter delete
This command deletes a MAC address from the filter table.
Syntax
address filter delete <mac-address>
mac-address - Physical address of client. Enter six pairs of hexadec
imal digits separated by hyphens.
Default
None
Command Mode
Global Configuration
Example
HP420(config)#address filter delete 00-70-50-cc-99-1b
HP420(config)#
Related Commands
show authentication (page 6-46)