General Commands; Configure - HP ProCurve 420 Management And Configuration Manual

General Commands

Command Function

configure

Activates global configuration mode
end Returns to the previous configuration mode
exit Returns to the Exec mode, or exits the CLI
ping Sends ICMP echo request packets to another node Exec
on the network
reset Restarts the system
show history Shows the command history buffer
show line Shows the configuration settings for the console port Exec
configure
This command activates Global Configuration mode. You must enter this
mode to modify most of the settings on the access point. You must also enter
Global Configuration mode prior to enabling the context modes for Interface
Configuration. See "Using the CLI" on page 3-2.
Default Setting
None
Command Mode
Exec
Example
HP420#configure
HP420(config)#
Related Commands
end (page 6-4)
Command Line Reference

General Commands

Mode Page
Exec 6-3
GC, IC 6-4
any 6-4
6-5
Exec 6-6
Exec 6-6
6-7
6-3