Overview - HP ProCurve 420 Management And Configuration Manual

Command Line Reference

Overview

6-2

Overview

This chapter describes the commands provided by the CLI.
The CLI commands can be broken down into the functional groups shown
below.
Command Group Description
General Basic commands for entering configuration mode, restarting
the system, or quitting the CLI
System Controls user name, password, system logs, browser
Management management options, clock settings, and a variety of other
system information
SNMP Configures community access strings and trap managers
Flash/File Manages code image or access point configuration files
RADIUS Configures the RADIUS client used with 802.1x authentication
Authentication Configures IEEE 802.1x port access control and address filtering
Filtering Filters communications between wireless clients, controls
access to the management interface from wireless clients, and
filters traffic using specific Ethernet protocol types
Interface Configures connection parameters for the Ethernet interface
and wireless interface
IAPP Enables roaming between multi-vendor access points
VLANs Configures VLAN membership
The access mode shown in the following tables is indicated by these abbrevi­
ations: GC (Global Configuration), and IC (Interface Configuration).
Page
6-3
6-8
6-25
6-30
6-34
6-39
6-47
6-51
6-77
6-78