Location Planning - HP MSM317 Deployment Manual

Figure 6: The MSM317 provides 120 degrees or greater signal coverage on the horizontal plane and a vertical signal that is
narrower than that of a traditional AP.

Location planning

Care should be taken to install the MSM317 in a location where there are as few obstructions as
possible to the signal. It is recommended that you mount the unit in an exposed area, such as under a
desk (without a courtesy panel) or on a wall. You may also consider mounting it in a hollow hidden at
the back of a wood desk (however, there may be some signal attenuation depending on the density
of the wood). In addition, be sure to install the unit with its faceplate as this helps to keep the antenna
external and maintain airflow around the device.
Before deployment, closely consider your environment, including building materials, building design,
and equipment. Metal, which may be contained in walls, windows, or equipment, is likely to block or
diminish the signal.
In addition, if you deploy the MSM317 in certain places, such as behind a minibar or wall, expect to
see significant variation from ideal conditions. Glass and wood, on the other hand, generally have
less impact on signal strength.
8