Interface; Dns Server - HP ProCurve 420 Management And Configuration Manual

interface

This command configures an interface type and enters interface configuration
mode.
Syntax
interface <ethernet | wireless g>
ethernet - Interface for wired network.
•
wireless g - Interface for wireless clients.
•
Default Setting
None
Command Mode
Global Configuration
Example
To specify the 10/100Base-TX network interface, enter the following
command:
HP420(config)#interface ethernet
HP420(if-ethernet)#

dns server

This command specifies the address for the primary or secondary domain
name server to be used for name-to-address resolution.
Syntax
dns primary-server <server-address>
dns secondary-server <server-address>
primary-server - Primary server used for name resolution.
•
• secondary-server - Secondary server used for name resolution.
server-address - IP address of domain-name server.
•
Default Setting
None
Command Mode
Global Configuration
Command Line Reference
Interface Commands
6-53