Cli: Configuring Wpa Settings - HP ProCurve 420 Management And Configuration Manual

Figure 5-11. WPA Settings Window

CLI: Configuring WPA Settings

CLI Commands Used in This Section
Command Syntax
interface <ethernet | wireless g>
authentication <open | shared>
[no] 802.1x <supported | required>
wpa-clients <required | supported>
wpa-mode <dynamic | pre-shared-key>
multicast-cipher <AES | TKIP | WEP>
Access Point Configuration
Configuring Wireless Security
CLI Reference Page
page 6-53
page 6-66
page 6-40
page 6-72
page 6-73
page 6-71
5-51