Vlan; Native-Vlanid - HP ProCurve 420 Management And Configuration Manual

vlan

This command enables VLAN-tag support for all traffic. Use the no form to
disable VLANs.
Syntax
vlan enable
no vlan
Default
Disabled
Command Mode
Global Configuration
Example
HP420(config)#vlan enable
Reboot system now? <y/n>: y

native-vlanid

This command configures the native VLAN ID for the access point.
Syntax
native-vlanid <vlan-id>
vlan-id - Native VLAN ID. (Range: 1-64)
Default Setting
1
Command Mode
Global Configuration
Command Usage
When VLANs are enabled on the access point, a VLAN ID (a number
between 1 and 4095) can be assigned to each client after successful
authentication using IEEE 802.1x and a central RADIUS server. If a user
does not have a configured VLAN ID, the access point assigns the user to
its own configured native VLAN ID (a number between 1 and 64).
Command Line Reference
VLAN Commands
6-79