Ip Http Server - HP ProCurve 420 Management And Configuration Manual

Command Line Reference
System Management Commands
6-14
Command Mode
Global Configuration
Command Usage
To avoid using common reserved TCP port numbers below 1024, the
configurable range is restricted to between 1024 and 65535. However, the
default port number is 80. To reset the default port number, use the no ip
http port command.
Example
HP420(config)#ip http port 49153
HP420(config)#
Related Commands
ip http server (page 6-14)

ip http server

This command allows this device to be monitored or configured from a
browser. Use the no form to disable this function.
Syntax
ip http server
no ip http server
Default Setting
Enabled
Command Mode
Global Configuration
Example
HP420(config)#ip http server
HP420(config)#
Related Commands
ip http port (page 6-13)