Step 3: Configure For New Hardware - Socket Gun Scanner (GS) 2X (Xtreme Performance) User Manual

STEP 3: Configure for New Hardware

1. Make sure the installation CD is still inside your computer.
2. The first time you insert the Bar Code Laser Scanning Card, a new
hardware or device driver wizard will appear. Complete the wizard by
following the appropriate instructions for your Windows version:
Windows XP
• Select Install from a list or specific location. Click Next>.
• Select Include the location in the search and browse to the CD drive. Click Next>.
Note: If a screen reports that the product has not passed Windows logo
testing, ignore and click Continue Anyway.
• Follow the remaining instructions until installation is complete.
Windows 2000
• In the second screen, select Search for a suitable driver for my device.
• Check Specify a location and browse to your CD drive. Click OK.
• Follow the remaining screens until the drivers are installed.
CHAPTER 5: SETUP FOR WINDOWS 98SE/ME/2000/XP 25