Hints And Tips On Programming The Scanner - Socket Gun Scanner (GS) 2X (Xtreme Performance) User Manual

Hints and Tips on Programming the Scanner

• Scanning Sequence
In most cases you need only scan one bar code to set a specific
parameter value. For example, to set the beeper tone to high, simply
scan the High Frequency (beeper tone) bar code listed under Beeper
Tone. The scanner issues a short high beep and the LED turns green,
signifying a successful parameter entry.
• Preservation of Settings
The settings are stored in non-volatile memory and are preserved
even when the scanner is powered down.
• Errors While Scanning
Unless otherwise specified, if you make an error during a scanning
sequence, just re-scan the correct parameter.
• Resetting Defaults
To return all features to their default values, simply scan the Set All
Defaults bar code.
WARNING!
DO NOT SCAN THE BAR CODES IN THIS
CHAPTER WITH ANY SOCKET SCANNER
PRODUCT OTHER THAN THE S-2208 GUN.
34