Beeper Definitions - Socket Gun Scanner (GS) 2X (Xtreme Performance) User Manual

Beeper Definitions

The scanner emits different beeper sequences and patterns to indicate
status of the scanner power, symbol decode, decode errors, etc.
Table 2-2. Standard Beeper Definitions
Usage Beeper Sequence
Low/medium/high
beep
Short high beep
Standard
4 long low beeps
Usage
5 low beeps
Lo/hi/lo beep
Hi/hi/hi/lo beep
Short high beep
Lo/hi beep
Parameter
Menu
Scanning
Hi/lo beep
Hi/lo/hi/lo beep
Low/hi/low/hi beep
Hi/lo beep
3 Beeps - long high
beep
Code 39
Buffering
Lo/hi/lo beep
Lo/hi beep
CHAPTER 2: SCANNING TIPS
Meaning
Power up.
A bar code symbol was decoded (if decode
beeper is enabled).
A transmission error was detected in a
scanned symbol. The data is ignored. This
occurs if a unit is not properly configured.
Check option setting.
Conversion or format error.
ADF transmit error.
RS-232 receive error.
Correct entry scanned or correct menu
sequence performed.
Input error, incorrect bar code or "Cancel"
scanned, wrong entry, incorrect bar code
programming sequence; remain in program
mode.
Keyboard parameter selected. Enter value
using bar code keypad.
Successful program exit with change in the
parameter setting.
Out of host parameter storage space.
Scan Set Default Parameter in Chapter 6.
New Code 39 data was entered into the
buffer.
Code 39 buffer is full.
The Code 39 buffer was erased or there
was an attempt to clear or transmit an
empty buffer.
A successful transmission of buffered data
9