Table of Contents
Advertisement
OPTIONAL: Configure Prefix/Suffixes
The SocketScan applet lets you specify prefix and suffix characters or
functions to be added automatically to the data that you scan.
1. Right-click on the SocketScan icon
your screen. In the pop-up menu, select Settings...
2. Start the applet. In SocketScan Settings, click on the Prefix/Suffix tab.
3. In the Prefix and Suffix fields, enter the characters you want to be
appended to each scan (128 character maximum). Click OK.
Note: A prefix or suffix can also be programmed into the S-2208, and the
effect is cumulative. SocketScan should be used to configure simple actions
such as a Carriage Return. For more complex prefix/suffixes or Advanced
Data Formatting, use the S-2208 Advanced Programming Guide to
program these functions directly into the gun. In this case, the default
Carriage Return suffix in SocketScan should be removed.
Download the S-2208 Advanced Programming Guide from:
www.socketcom.com/support/support_bar.asp
30
in the task bar at the bottom of
Note: Only printable
ASCII characters can be
used as prefixes or
suffixes.
Advertisement
Table of Contents
