Table of Contents
Advertisement
OPTIONAL: Configure Prefix/Suffixes
The SocketScan Prefix/Suffix applet lets you specify prefix and/or suffix
characters to be added automatically to the data you scan. This helps to
further eliminate manual data entry.
1. Tap on the SocketScan icon in the menu bar
(visible in the Today screen for Pocket PCs).
Note: You can configure prefix/suffixes if the "no scanning card
detected" icon appears.
2. In the pop-up menu, select Prefix/Suffix...
3. In the screen that appears, enter the characters you want to be appended
to each scan (128 character maximum). Tap ok.
Note: A prefix or suffix can also be programmed into the S-2208, and the
effect is cumulative. SocketScan should be used to configure simple actions
such as a Carriage Return. For more complex prefix/suffixes or Advanced
Data Formatting, use the S-2208 Advanced Programming Guide to
program these functions directly into the gun. In this case, the default
Carriage Return suffix in SocketScan should be removed.
Download the S-2208 Advanced Programming Guide from:
www.socketcom.com/support/support_bar.asp
20
to launch the applet
Note: Only printable
ASCII characters can be
used as prefixes or
suffixes.
Advertisement
Table of Contents
