Control - Planet CAM-ISD52 User Manual

In this section you can define how the camera will react to recovery from
power down, long release from control, and make adjustment to image.
Auto Resume
Power-on resume When this function is set ON and after power
Preset Freeze
Image Flip
Return
.
User's manual

8.6 Control

To decide whether camera will go auto-run after
manual control stops for certain time. First you
decide if you want to drive the camera into
AUTO-RUN with ON / OFF selection, then you
choose what type of auto-run and how long the
camera will start doing it after control stops.
ON / OFF to turn this function on or shut it off
Mode the AUTO-RUN type you want to have.
6 modes are in option list::
Auto-pan
scan
and Patrol
Time how long before the auto-run will go. Options are
1, 2, 3, 4, 5 and 10 minutes.
retrieves
automatically go the state it was running before
power went down.
This will keep image at rest when camera is
running from one preset to another. It is useful if
motion detection is set up in your DVR or you
have network surveillance.
(a moving picture will cause false alarm)
To turn the image up side down and left to right.
Back to the main menu
, Auto-scan
(two spots)
(one of the 4 groups)
(selected presets
from breaking,
(all presets)
, Tour-scan
(mixed groups)
)
this camera
, Group
will
.
63