Table of Contents
Advertisement
To choose your controller and review the basic setup done to this unit.
Controller:
Info
Return
To decide whether to display the number and name of this camera, current
preset and the zoom / focus information on the screen.
Camera ID:
Camera Name:
Preset Name:
Preset Number:
PTZ Position:
.
User's manual
8.2 System Info
Keyboard and DVR are two most common devices used
for PTZ control. However, controllers are sometimes very
different in certain functions, which you may find PTZ
works perfectly with certain controllers but not with the
some others.
This happens quite common to DVR, particularly, as many
DVR devices don't provide enough control buttons on their
panels
(especially for OSD operation),
could make PTZ or camera controls impossible.
To solve the issue, this camera offers choices – for the
controllers which don't have enough buttons, you may use
alternative keys.
We suggest you to check controller list, which is
embedded in the sub-menu, and select the one that
matches yours.
To show you the current setting of protocol, baud rate,
camera ID and firmware version. Protocol,
ID
are set up with the DIP switches
To return to the main OSD menu
8.3 Display
show or not show the number of this camera on display.
Choose ON or off
show or not show the name of this camera.
when ON is selected, give the name in the next layer.
Naming is by choosing alphanumeric characters from the
list
(displayed one per time)
show or not show the names of presets.
when ON is selected, give the name in the next layer.
Rule is the same as naming the camera
show or not show the numbers of presets.
show or not show pan, tilt, zoom positions.
(see
OSD table 2
(default is OFF)
. Maximum length is 16.
and such handicap
in previous page)
baud rate
Default is OFF.
Default is OFF
(see above lines)
Default is OFF.
Default is OFF.
and
.
51
Advertisement
Table of Contents
