Overview of DIP switches
There are three sets of DIP switch on board for different setup purposes.
location #
DS1+DS2
DS2
(P3~P7)
DS3
Refer to the picture on below for DIP switch locations.
The following paragraphs are providing the detail descriptions of the three main
setups. Installer should read it with care, before starts doing the hardware mounting
and cabling work.
.
User's manual
4.1 DIP switches
bit quantity
10
(P1&2)
5
2
DS3
Device ID setup
Protocol / baud rate setup
Network impedance
DS1
DS2
used for
.
8