Table of Contents
Advertisement
Enable:
Return
.
User's manual
It is strongly suggested to set up mask in comply with factors:
1.
have the target in relative large size
2.
give mask size twice big as the target's, or even larger
Although not recommended, it is also possible that the second
boarder is out of the target area
this case, move the lens to right-lower direction until target hits
the second boarder.
target may come out the mask when you zoom it in.
At the confirmation of the second boarder, black mask will
appear in a proper size and block the target from being viewed.
The black mask will also move to new position or change to
new size, along with your PT and zoom in/out controls.
After the mask is successfully created, you need to decide if it
will be engaged. This is the place for you to enable or shut off
individual mask, individually.
Back to the main menu
having target in small size is not recommended
1
4
important:
(fig.3; target is in small size)
This is not recommended because
2
5
mask size is not in proper
scale in this example
at
finish
. In
3
.
65
Advertisement
Table of Contents
