Scan - Planet CAM-ISD52 User Manual

You may choose the most suitable auto-run function among the various
patterns given by this camera; When engaged, camera will move, in clockwise
direction, from one preset to the next until stop is called.
Auto Pan
All Preset
Group Scan
Tour Scan
.
Patrol
.
User's manual

8.5 Scan

3 sub-items:
Pan / Tilt To do continuous pan/tilt between two positions A
and B. Set up the start position, end position,
moving speed and dwell first. If you wish to engage
it right away, press RUN on the menu.
Pan Only This is for continuous panning between two spots A
/ B without changing the vertical position of lens.
Circle To perform continuous panning in 360
choose the start point and panning speed.
To make camera move around all the presets stored
in this camera. Set up the speed and dwell, then
start running the scan with RUN command on list.
To make camera move around all the presets stored
in this camera..
This camera automatically grouping the first 16
presets stored in it into 4 groups (1 ~ 4). The 4
groups can run separately, at their own speed and
dwell length per group.
In the sub-menu there is of 4 groups. Each has its
own selection of speed and dwell, and you may run
or stop one of these four alone
This function allows you to select and run the 4
groups in different combinations.
In each Group in the list, you may choose to turn it
on or off. You may also redefine the speed and dwell
length, or skip them. Once the selection is done,
press RUN on menu to start the journey.
Patrol is defined as the scanning to selected Presets
(among 1 to 16). To organize the route, go through
all the 16 presets one by one with decision of ON or
o
. You need to
.
61