Ceiling-Drop Mount (With Cam-Cm) - Planet CAM-ISD52 User Manual

Pre-assembling of the Bowl Module
Both ceiling-drop and wall-mount needs to have a bowl module, an assembly of the
mounting base and metal bowl supplied in the mounting kit, be built first.
Follow the flow chart on below for building up the bowl module.
The mounting base
To drop camera from ceiling, take the ceiling bracket
put the cables into the tube and have them come out from cable outlet
1.
put the bracket on top of the bowl and tight them together with screws
2.
Put the bowl
on bracket
Locate the assembled piece onto the place the camera is
3.
to be mounted, and fix it on the surface completely with
screws through the 4 holes on the bracket
Get the camera and plug it onto the base; watch for the
4.
direction of the connectors on camera and mounting base
and be sure they are mated well. Then rotate the camera
body counter-clockwise until it is completely locked
Put the safety screw
5.
screw it in
.
User's manual

5.2 Ceiling-drop mount (with CAM-CM)

Put the base
into the bowl
The bowl module
(anti-loss)
Metal bowl
(option item)
Make an
assembly
in locking position and
Make a
module
The bowl module
and bowl module,
.
32