Wall Mount (With Cam-Wm) - Planet CAM-ISD52 User Manual

Pre-assembling of the Bowl Module
Both ceiling-drop and wall-mount needs to have a bowl module, an assembly of the
mounting base and metal bowl supplied in the mounting kit, be built first.
Follow the flow chart on below for building up the bowl module.
The mounting base
Mount the camera on wall
To mount camera on wall:
Take the wall-mount bracket
1.
put it on the target place and fix it with the
supplied screws (total of 4)
Take the cover-screw off the bracket, and
2.
remove the cover from bracket
Attach the bracket on top of the bowl and
3.
tight them together with screws
Put the cables in the trench of bracket, and
4.
all connectors come out through the cable outlet. Then put cover and screw
back.
.
User's manual

5.3 Wall mount (with CAM-WM)

Put the base
into the bowl
(optional item)
Make a
module
Metal bowl
,
Remove this screw
The bowl module
.
33