Table of Contents
Advertisement
This section is to let you choose the correct camera version, define or adjust
the image and optical functions, and decide the zooming speed.
Camera Type:
Zoom Speed:
Advance Setting: Most of the camera's DSP and optical functions are to be
Cam Title:
White Bal:
.
User's manual
8.4 Camera
Show camera version.
to set the speed of zooming. It is recommended that you test
different speed before making final choice. Fast speed saves
time but may cause missing of the best position for image
size. Slow speed does the opposite for the good and bad.
setting or adjusted here, under the sub-title.
This is for setting and showing camera name;
Similar function is available in the main page, so we suggest
you leave this OFF constantly.
White balance function is for setting color temperature based
on the environment the camera is in, or personal preference:
ATW:
Auto-Tracking-White balance. ATW checks the
whole image, weights all colors in the picture and
updates the white level and color temperature,
which is good for constant changing scene.
Indoor
Indoor is a mode of ATW but tends for more blue
Outdoor Outdoor is also an ATW mode giving more red for
imaging
The indoor and outdoor modes are in the sub-page of item
ATW for versions of 30x, 23x and 10x, while they are in the
same OSD page the ATW is listed for the 37x version
Camera will make color calibration to the picture for
once and keep the
color
until the next order is
manually given. To
refresh the color, you
need
manual trigger to the
AWC, with it shown
on the display.
AWC:
Auto-White-Balance.
temperature
to
make
a
main setup
CAM TITLE
OFF
WHITE BAL
AWC
BACKLIGHT
OFF
●
`
●
press OK, iris-open
or zoom-in, to renew
EXIT
image color (AWC)
SET
.
52
Advertisement
Table of Contents
