Edit Types; Select An Edit Type; Select Accept All Or Reject All - Minelab CTX3030 Instruction Manual

CTX 3030 Instruction Manual
Modes Menu

Edit Types

Manual
Use Manual editing to manually move the Edit Frame around the Discrimination
Pattern. You can use the Identify button to edit areas of the pattern to accept (white
areas) or reject (grey areas) certain targets. Remember that using a larger Edit Frame
will change the exact target coordinates plus one or two segments either side.
Auto Accept
Use Auto Accept to automatically modify the Discrimination Pattern to accept the
Ferrous and Conductivity coordinates of a detected target.
Auto Reject
Use Auto Reject to automatically modify the Discrimination Pattern to reject the
Ferrous and Conductivity coordinates of a detected target.

Select an Edit Type

1. From the Edit Type menu use the arrow buttons to highlight your required option
and press Select.
The Pattern screen will be displayed.
2. Press Select again to return to the Edit menu.
Your chosen Edit Type will be displayed on the right hand side of the screen.
3. Use the down arrows to highlight the Exit option and press Select.
You will be returned to the Mode Settings menu.

Select Accept All or Reject All

1. From the Edit menu, use the down arrow buttons to highlight the Accept All or
Reject All option and press Select.
The updated Pattern screen will be displayed. If you selected Accept All the entire
pattern will be white, and if you selected Reject All the entire pattern will be
shaded.
2. Press Select to return to the Edit menu.
3. Use the down arrow button to highlight and select Exit option and press Select.
The Save Pattern menu will be displayed.
4. Select Yes to saves changes or No return to the Mode Settings menu.
When Yes is selected, a confirmation message will be displayed and you will be
returned to the Mode Settings menu. Select No to discard the changes and return
to the Mode Settings menu.
35