Reset The Ctx 3030; Reset Product; Open The Reset Quick Menu; Reset Geostore - Minelab CTX3030 Instruction Manual

Reset
ʯ Reset the GeoStore
ʯ Reset Settings
ʯ Reset All
ʯ Reset Language (default US
English)
CTX 3030 Instruction Manual

Reset the CTX 3030

Reset the CTX 3030
The CTX 3030 is delivered in its factory preset state and any changes made to the
detector's settings are saved automatically. These settings will remain until you
manually change or reset them using the Reset menu.

Open the Reset Quick Menu

1. With the detector switched off, press and hold the power button.
The detector will power up and play the startup tune.
2. Keep holding the button until you hear a low tonal sound, and then release the
button.
The Reset menu will be displayed with the following options:

• Reset GeoStore

• Reset Settings

• Reset All
• Language
3. Use the arrow buttons to highlight the option you require and press Select.
Reset GeoStore
Select the Reset GeoStore option to clear the contents from the GeoStore. All
FindPoints, WayPoints and GeoHunts will be deleted.
When the GeoStore has been cleared a confirmation message will be displayed.
Reset Settings
Select the Reset Settings option to clear all user settings and delete user search
modes. Information in the GeoStore (FindPoints, WayPoints, GeoHunts) will not be
affected.
When Reset Settings has been completed the detector will reboot.
Reset All
Select the Reset All option to return all settings to their factory preset levels, delete
all search modes and empty the GeoStore.
When Reset All has been completed the detector will reboot. When start-up is
complete the detector will prompt you to select your language before displaying
the Detect screen.
51