Introduction; Applications; Package Contents; System Requirements - CYP CMSI-8H8HC Operation Manual

1. INTRODUCTION

The 8×8 HDMI Matrix with simultaneous CAT6 and HDMI outputs
connects eight HDMI sources to 16 displays. This matrix features 8
HDMI outputs and each HDMI output is mirrored to provide a Dual-
CAT-Cable output which runs simultaneously. Connect a CH-1106RX
Receiver to each of the Dual-CAT-Cable outputs to extend the HDMI
signal up to 45m for multi-room connectivity.This matrix switcher can
be controlled via the supplied IR Remote Control, RS-232, Telnet,
Web GUI or by using the selection buttons on the front panel. This
device supports 'Deep Color', High Definition Audio, and 3D signal
compatibility.

2. APPLICATIONS

• Multi-zoned HD installations
• HD and AVR Sub-zone installation
• Video and TV wall display and control
• Security surveillance and control
• Commercial advertising, display and control
• University Lecture hall display and control
• Retail demonstration and sales
• Telnet and Web GUI Control

3. PACKAGE CONTENTS

• 8×8 HDMI over Dual CAT6 Matrix
• 1×IR Extender
• 2×IR Blaster
• 1×24 V/6.25 A DC Power Adaptor
• 1×IR Remote Control
• Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI equipped source devices, connect with HDMI cables or DVI
equipped source, connect with DVI to HDMI cables
• HDMI equipped displays (TVs or monitors) or HDMI equipped AV
receivers, connect with HDMI cables
• HDMI over dual CAT6 Receiver(s) with industry CAT6 cable
1