Battery Pack Removal And Replacement - Polycom 8400 Series Quick Start Manual

Battery Pack Removal and Replacement

To remove the Battery Pack, press up on the latch on the back of
the handset. The Battery Pack releases outward.
Battery Pack
Removal latch
18
To replace, slide the tab of the Battery Pack into the bottom slot of
the handset cavity. Gently press the top of the Battery Pack until it
snaps into place. The Battery Pack should snap into position with
minimal pressure.
Do not remove the Battery Pack to power off the handset. Log off or
power off the handset and then remove the Battery Pack if you need
to replace it.
Bottom slot
19
Tab