For Windows Xp/Server 2003 - Oce CS171 User Manual

Setting up the printer driver

For Windows XP/Server 2003

1
After using a parallel cable or a USB cable to connect this machine to
a computer, turn on the computer.
– Do not disconnect or connect the cable while the computer is start-
ing up.
2
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
–
–
3
Turn this machine on.
– The Add New Hardware Wizard starts up.
If the Add New Hardware Wizard does not appear, turn this ma-
chine off, then on again.
– When turning the machine off, wait for 10 seconds or longer before
turning it on again; otherwise the machine may not function normal-
ly.
4
Select "Install from a list or specific location (Advanced)", and then
click the [Next] button.
5
Under "Search for the best driver in these locations", select "Include
this location in the search", and then click the [Browse] button.
6
Depending on the operating system and printer driver that you are us-
ing, specify the folder on the CD-ROM that contains the printer driver,
and then click the [OK] button.
– PCL driver: Folder at Driver\Drivers on the User Software CD-ROM
– PostScript driver: Folder at Driver\Drivers on the PostScript Printer
Driver CD-ROM
7
Click the [Next] button, and then follow the on-screen instructions.
– When the Digital Signature dialog box appears, click the [Continue]
button.
CS171P
PCL driver: User Software CD-ROM
PostScript driver: PostScript Printer Driver CD-ROM
2
2-17