Windows Xp/Server 2003; For Network Connection (Lpr/Port 9100); Settings For The Machine; Installing The Printer Driver Using The Add Printer Wizard - Oce VarioLink 4522c User Manual

4.2

Windows XP/Server 2003

4.2 Windows XP/Server 2003
4.2.1

For network connection (LPR/Port 9100)

To use LPR/Port 9100 printing, specify the port while installing the printer driver.

Settings for the machine

To use Port 9100 or LPR printing, you must configure the network settings for the machine in advance.
Items to be configured
IP address
RAW port number
LPD Setting
d
Reference
For details on the network settings for the machine, refer to the "User's Guide [Network Administrator]".

Installing the printer driver using the Add Printer Wizard

0 Installing the driver to Windows XP/Server 2003-based computers requires the administrator authority.
1
Insert the printer driver DVD-ROM into the DVD-ROM drive of the computer.
2
Press the [Start] key, and then select "Printers and Faxes".
% If "Printers and Faxes" is not displayed in the [Start] menu, open "Control Panel" from the [Start]
menu, click "Printers and Other Hardware", then click "Printers and Faxes".
3
In Windows XP, select "Add a printer" from the "Printer Tasks" menu.
In Windows Server 2003, double-click "Add Printer".
"Add Printer Wizard" starts.
4
Click [Next].
5
Select "Local printer attached to this computer", and then click [Next].
% Clear the "Automatically detect and install my Plug and Play printer" check box.
The "Select a Printer Port" page appears.
6
Select "Create a new port", and then select "Standard TCP/IP Port" as the type of port.
7
Click [Next].
"Add Standard TCP/IP Printer Port Wizard" starts.
8
Click [Next].
9
In the "Printer Name or IP Address" box, enter the IP address for the machine, and then click [Next].
% If the "Additional Port Information Required" dialog box appears, go to Step 10.
% If the "Finish" dialog box appears, go to Step 13.
10
Select "Custom", and then click [Settings].
VL6522c/VL5522c/VL4522c
Description
In "TCP/IP Setting" of the machine, specify the IP address.
To use Port 9100 printing:
In "TCP/IP Setting" for the machine, enable the RAW port number
(initial setting: "9100").
To use LPR printing:
In "LPD Settings" for the machine, enable LPD printing.
4
4-11