Printer Driver Settings (Windows 98Se/Me) - Oce CS171 User Manual

Setting up the printer driver

Printer driver settings (Windows 98SE/Me)

When using Port 9100 to print under Window 98SE or Windows Me, change
the printer driver port to the Peer to Peer port.
1
Click the [Start] button, point to "Settings", and then click "Printers".
2
Right-click the icon of the installed printer, and then click "Properties".
3
On the Details tab, click the [Add Port] button.
4
Click "Others", select "Peer to Peer Port" from the list, and then click
the [OK] button.
The Peer to Peer setup dialog box appears. The printer connected to
the network is automatically detected.
5
Select the printer from the device list, enter the port number, and then
click the "Add Port" button.
– The port is added. Skip to step 8.
– If the desired printer does not appear in the device list, proceed to
step 6.
6
Click the [Manual setup] button.
7
Enter the TCP/IP or IPX setting for the network being connected, and
then click the "Add Port" button.
– The port is added. Skip to step 8.
8
Click the [OK] button when the confirmation message appears.
The port is added.
9
Click the [OK] button to complete the operation.
CS171P
2
2-45