Oce CS171 User Manual page 310

5
Be sure to load letterhead paper so that the side to be printed on faces
up.
Note
The image will be printed on the surface of the paper facing down when
the paper is loaded into the bypass tray.
!
Detail
For details on specifying the paper size for the bypass tray, refer to "User
Setting" on page 4-25.
For details on the paper sizes, refer to "Paper" on page 5-3.
If special paper is loaded, the paper type setting must be specified. For
details, refer to "Paper Tray" on page 4-24.
5-26
Loading copy paper
CS171P