For Windows Xp/Server 2003 Users - Oce fx2081 User Manual

For Windows XP/Server 2003 users

IMPORTANT
Make sure that you followed installation steps 1 to 9 described on
1-3 through
10
Plug the USB cable to your machine and then connect it to your com-
puter.
NOTE
Be sure to use a shielded USB cable. Use of an unshielded cable
may result in radio interference.
11
Turn on your machine.
12
The "Found New Hardware Wizard" will appear.
NOTE
If the following message appears. Select "No, not this time" and click
[Next].
13
Select "Install from a list or specific location (Advanced)" and click [Next].
14
Select "Include this location in the search:" and clear any other choices.
Click [Browse] to specify the folder you have located in step 6 on
1-3. Then click [OK].
If you did not change the location, navigate to your hard disk: "C:\Oce_
fx2081\PCL" .
1-4.
Connect
pages
page
1-7