Oce CS171 User Manual page 375

Troubleshooting
12
Grasp both sides of the staple car-
tridge holder, lift it up, and then pull it
out.
13
Swing open the shutter of the staple
cartridge.
14
Pull out toward you the two staples
jammed at the end of the staple car-
tridge.
What happens if two staples are
?
not removed?
% Stapling cannot continue correct-
ly.
15
Return the shutter of the staple cartridge to its original position.
16
Insert the staple cartridge holder,
making sure the tabs on the holder
slide along the rails in the compart-
ment.
CS171P
Staple cartridge
holder
8
8-33