Slide 13; Exit Service Mode - Maytag 27" Troubleshooting Manual

Slide 13

Exit Service Mode

1) Press Chime and Extra Rinse keys for 3seconds again, or 2) Press Off, or
3) Unplug the machine. After five (5) minutes of inactivity (user key presses)
in Service Mode, the machine will exit the Service Mode and resume normal
operations. Pressing the Off key will completely exit Service Mode. If a cycle
is running, cancel the cycle. Pressing the Rotary Selector knob while
running a test will pause the individual test, while remaining in Service Mode.
A power loss during Service Mode will cancel this mode.
Refer to Technical Data Sheet for Detailed Instructions
Exit Service Mode
To exit:
1) Press Chime and Extra Rinse keys for 3seconds again, or
2) Press Off, or
3) Unplug the machine. After five (5) minutes of inactivity (user key presses) in Service Mode,
the machine will exit the Service Mode and resume normal operations. Pressing the Off key
will completely exit Service Mode. If a cycle is running, cancel the cycle. Pressing the Rotary
Selector knob while running a test will pause the individual test, while remaining in Service
Mode. A power loss during Service Mode will cancel this mode.
Press and
hold 3 Sec.
Or press Off
Exit Service Mode
20