Table of Contents
Advertisement
COMPLETE INSTALLATION
q
Check electrical requirements. Be sure that you have
the correct electrical supply and the recommended
grounding method.
INSTALLING COIN SLIDE AND COIN BOX
The coin slide mechanism, service door lock and key, and coin
box lock and key are not included with some models, but can
be obtained from the usual industry sources.
Remove the service door of the meter case by lifting it up
at the back. Install the money-accepting device. (Refer to
manufacturer's instructions for proper installation.)
A ground connection is needed for the coin slide, which can be
made by connecting the available harness (W10846503) to the
coin slide.
TYPICAL FULL LOAD SIZES
Load Type
Mixed Load
Permanent Press
12
Ground
connection
Loading Suggestion
3 double sheets
4 pillowcases
6 pair shorts
8 T-shirts
2 shirts
2 blouses
8 handkerchiefs
2 double or
1 king size sheet
1 tablecloth
1 dress
1 blouse
2 slacks
3 shirts
2 pillowcases
q
Check that all parts are now installed. If there is an extra part,
go back through steps to see what was skipped.
q
Check that you have all of your tools.
q
Check that shipping materials were completely removed
from washer.
q
Dispose of/recycle all packaging materials.
q
Check that the water faucets are on.
q
Check for leaks around faucets and inlet hoses.
q
Remove film from console and any tape remaining on
washer.
q
Plug into a grounded outlet or connect power.
q
Check that circuit breaker is not tripped or fuse is not blown.
q
Start the washer using the payment system if used and
check that the washer completes the cycle without a fault
or water leak.
Install a lock and cam on the meter case service door. Install
the coin vault with lock and key in the meter case opening.
Load Type
Heavy Work Clothes
Knits
Loading Suggestion
3 pair pants
3 shirts
1 coverall
4 pair jeans
1 overall
3 blouses
4 slacks
6 shirts
4 tops
4 dresses
Advertisement
Table of Contents
