Install The Pci Riser Board Assembly - HP ProLiant DL100 Series User Manual

Power down the server (on page 15).
1.
Remove the server from the rack (on page 15).
2.
Remove the access panel (on page 16).
3.
Disconnect all internal cables connected to existing expansion boards.
4.
Remove the PCI riser board assembly:
5.
Remove the T-10 screw.
a.
Remove the T-15 screws.
b.
Remove the riser board assembly.
c.

Install the PCI riser board assembly

CAUTION:
and remove all AC power cords before removing or installing the PCI riser board assembly.
To prevent damage to the server or expansion boards, power down the server
Operations 17