General Dimm Slot Population Guidelines - HP ProLiant DL100 Series User Manual

Proliant dl100 series server
Hide thumbs Also See for ProLiant DL100 Series:
Table of Contents

Advertisement

Item
Description
4
Memory speed
5
DIMM type
For the latest supported memory information, see the QuickSpecs on the HP website
(http://www.hp.com).

General DIMM slot population guidelines

The HP ProLiant DL120 G6 Server has six memory slots.
There are two channels per server with three DIMM slot per channel.
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 2 consists of the three (3) DIMMs that are furthest from the processor
Different types of processors have different types of memory support.
The server supports up to 12 GB (6 x 2-GB) for Registered Memory configurations.
The server supports up to 16 GB (4 x 4-GB) for Unbuffered Memory configurations.
Observe the following guidelines when installing DIMMs:
Do not mix Unbuffered and Registered PC3 DIMMs.
Do not mix DIMMs of varying speeds.
Do not mix DIMMs of varying voltages.
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs).
Do not install DIMMs if the processor is not installed.
Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank) within a channel.
Heaviest load (DIMM with most ranks) within a channel goes furthest from the CPU.
Non-ECC DIMMs are not supported
Each channel supports up to two Unbuffered DIMMs.
When using UDIMMs, use ECC only.
When possible, balance the loads per channel.
If quad-rank DIMMs are installed for the processor, a maximum of two DIMMs can be installed on
each channel for that processor.
If a channel contains quad-rank DIMMs, the quad-rank DIMM must be installed first on that channel.
256MB technology, x4 DRAM on UDIMMs and quad-rank UDIMMs are not supported.
Always use HP qualified DIMMs.
Populate the DIMM slots in the following sequence:
DIMM 3A and DIMM 6B
DIMM 2C and DIMM 5D
DIMM1E and DIMM 4F
Definition
10600 = 1333-MHz
8500 = 1066-MHz
R = RDIMM (registered)
E = UDIMM (unbuffered with ECC)
Hardware options installation 25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl120 g6

Table of Contents