Install The Pci Riser Board Assembly - HP ProLiant DL320 Generation 5p User Manual

Power down the server (on page 20).
1.
Remove the server from the rack (on page 20).
2.
Remove the primary access panel (on page 21).
3.
Disconnect any internal or external cables connected to any existing expansion boards.
4.
Remove the PCI riser board assembly.
5.

Install the PCI riser board assembly

CAUTION:
remove all AC power cords before removing or installing the PCI riser board assembly.
Install the PCI riser board assembly.
1.
Connect any internal cables for expansion boards.
2.
Install the primary access panel.
3.
To prevent damage to the server or expansion boards, power down the server and
Operations 22