System Maintenance Switch - HP ProLiant DL100 Series User Manual

Item Description
5 Processor fan 3 cable connector
6 Optical drive SATA cable connector
7 Hard drive 4 SATA cable connector
8 Hard drive 3 SATA cable connector
9 Hard drive backplane SGPIO connector
10 Hard drive 2 SATA cable connector
11 Hard drive 1 SATA cable connector
12 Reserved
13 System fan 4 cable connector
14 Hard drive backplane 12C cable connector
15 Front panel board cable connector
16 External SAS hard drive LED cable connector
17 Front USB port cable connector
18 Internal USB connector for tape device
19 BMC recovery jumper
20 BMC password reset jumper
21 Expansion slot 1 (for riser board)
22 Expansion slot 2 (for riser board)
23

System maintenance switch

24 Internal USB connector for STD USB
25 TPM connector
26 System battery
27 4-pin ATX processor power connector
28 Processor
System maintenance switch
Position
S1
S2
S3
S4
S5
S6
S7
Default Function
Off Off = Normal
On = Clears the BIOS CMOS and
rests the administrator password.
Off Off = Normal BIOS boot block
On = Recovery BIOS boot block
Off Off = Disables the RAID key.
On = Enables the RAID key.
Off Reserved
Off Reserved
Off Reserved
Off Reserved
Component identification 10